|
|
Stopwatch for measuring of sports events
Tajč, Martin ; Petržela, Jiří (referee) ; Hruboš, Zdeněk (advisor)
The aim of this bachelor work is the construction of the electronic stop-watch for measurement at sports events. This stop-watch is primary designed for use at firefighters competitions. The first part of the work is focused on a flowchart of the stop-watch and an analysis of its parts. Some alternative methods, which could be used during the construction, are compared. In the following part, there is an algorithm for the microprocessor applied in it described and features of programming languages are briefly compared. Next in the text, there are a detailed user manual as well as a manual for executing of the display panel. In the supplement, particular electronic schematics and printed wiring boards are included.
|
|
|
Matrix headphone amplifier for studio monitoring
Štěrba, Václav ; Petržela, Jiří (referee) ; Kratochvíl, Tomáš (advisor)
This bachelor´s thesis describes the design of a matrix headphone amplifier for studio monitoring. The proposed amplifier is a purpose-built device to be used in studio sound recording for the mixing of multiple audio channels directed to the interpreters´or performers´ headsets. The device is basically composed of the following parts: An input section for the audio line, a mixing section which secures the setting of individual input levels for each output, an amplifier section allowing the setting of the output signal level for each output, and an output section enabling the connection of headphones. The equipment utilizes a connection to a multi-channel audio signal bus; this bus also provides for remote power supply to all the connected devices. The solution described in the thesis can be defined as alternative monitoring that facilitates quick and easy connection of a required number of monitoring points (in other cases, such monitoring is usually realized by means of individual small mixing consoles).
|
|
|
MATLAB/Simulink Model Based Design Using C2000 Microcontrollers
Šoupal, Ondřej ; Ctibor, Jiří (referee) ; Pazdera, Ivo (advisor)
The aim of this thesis is to explore possibilities of rapid control prototyping, describe the concept of creating the software application in MATLAB/Simulink environment with use for development kit Texas instruments LaunchPad and create an application for DC and induction motor control in this environment. This work describes the application for unipolar/bipolar control H-Bridge of power converter for DC motor, measurement of output currents, speed and its displaying in real time using serial control interface. This thesis also desribes scalar and vector control of induction motor. All software applications with measurements are created in MATLAB/Simulink and attached to the thesis.
|
|
|
PC oscilloscope – hardware part
Mego, Roman ; Dřínovský, Jiří (referee) ; Frýza, Tomáš (advisor)
The aim of the bachelor`s thesis is to design and construct a device, which will be used as oscilloscope and logic analyzer. This document contains a basic list of attributes of oscilloscopes, which are used in designing. In the next part of document, block diagram is shown, which is analyzed by functional blocks to the circuit diagram. Third part of the document describes, algorithm for controlling and data capturing. The end of the document is dealing with realization of hardware and software parts.
|
|
|
The influence of alcaline accumulators loading on their parameters
Čech, Ondřej ; Vrbický, Jiří (referee) ; Sedlaříková, Marie (advisor)
This master's thesis deals with alkaline battery characteristics and it has special consideration of nickel-cadmium cells. There are three main experimental parts in this paper. First one is concerned with positive electrode materials properties and is aimed to investigate impact of magnesium ions formed into nickel hydroxide electrode structure. Second part deals with battery charging/discharging and response measurement tool design. National Instruments hardware PXI modules for data acquisition was used and program in LabView environment was made. Last one is concerned with nickel-cadmium cell properties changes during increased temperature stressing. Investigation of cell self-charge changes during lithium hydroxide addition into electrolyte was made.
|
|
|
Algorithms for the Control of the Induction Motor
Hundák, Vladimír ; Běloušek, Radim (referee) ; Patočka, Miroslav (advisor)
Hlavným cieľom tejto práce je vytvorenie simulácií rôznych algoritmov riadenia asynchrónneho motora a vzájomné porovnanie ich vlastností. Zaoberá sa taktiež možnosťami konfigurácie náhradného zapojenia na T-článok, -článok a -článok. Obsahuje jednak teoretický rozbor, a taktiež aj simulácie jednotlivých spôsobov riadenia spolu s podrobným návodom na ich realizáciu. Celkovo budú vykonané 3 simulácie – simulácia vektorového riadenia s orientáciou na rotorový tok, vektorového riadenia s orientáciou na statorový tok a simulácia takzvaného prirodzeného riadenia. Ide o úplne nový typ riadenia, ktorého autorom je vedúci tejto diplomovej práce. Jeho simulácia bola vôbec prvým pokusom o funkčnú realizáciu tohto typu riadenia.
|
|
|
Audiovisual stimulator
Bartoš, Michal ; Čech, Petr (referee) ; Hrozek, Jan (advisor)
The main objective of this study is to learn about the audiovisual stimulator and to create hardware resolution of stimulation LED glasses and in environment of the program LabView application, which operate this stimulation LED glasses and in the same time create sound of stimulation. Use environment of the program LabView. Application, which is create in environment of the program LabView, enable operate stimulation LED glasses and arrange sound from three source with two different method, which use modern AVS. Application contains a lot of security, informative and agreement components.
|
|
|
Design of 10-channel audio equalizer with optimization of frequency characteristic and spectral audio analyzer
Štěrba, Václav ; Dvořák, Radek (referee) ; Šotner, Roman (advisor)
This work deals with the design of a 10-zones equalizer with optimized frequency characteristics with a spectrum audio analyzer. In this work the problem of processing audio signals using equalization for filtering the interference frequencies, correction of frequency cover signal boost or suppression of the required zones of the audible spectrum are also analyzed. The influence of subjective perception of sound intensity of the audio signals reproduction and its use in working with equalizer is discussed too. The work describes the principles and usage of the audio-analyzer as a tool for the optimization of the audio equalization setting when ensuring the appropriate listening conditions of music reproduction, spoken word, sounds, etc. It also focuses on the signal source for testing audio-chains, their generation and measurement using the audio analyzer. The equalizer equipment, audio-analyzer generator of reference signals equipment and power supply are designed as a single unit.
|
|
|
Possibility of using LabView for simulation and calculation of the energy balance of a hydrogen-oxygen fuel cell
Fryda, Daniel ; Macháček, Jan (referee) ; Šlezingr, Jan (advisor)
This bachelor thesis deals with the calculation of the characteristics of hydrogen-oxygen fuel cell and their simulation in LabVIEW. It is divided into several parts. At the beginning thesis clarifies the issues of fuel cell and contributes to a better understanding of its activities. It explains what a fuel cell actually is, what is the principle of its work, describes its components, access to its history and its development to the present. Further on the thesis divides fuel cells into the different types and deals with deeper hydrogen-oxygen fuel cell. The fourth chapter is devoted to its use in practice and in laboratory education . Another part is focused on the LabVIEW program where is described the principle, use and basic parts of the program. In the practical part is implemented the model of the laboratory task in LabVIEW program. In chapter no. 6 are developed the operating instructions of the program and described in detail the creation of the model. The aim of this bachelor thesis is creation of an overview of fuel cells, their properties and possibilities of using for practice and laboratory education and then simulation of the laboratory task in LabVIEW program which is based on measured data and the characteristics of the hydrogen-oxygen fuel cell. This laboratory task can be used as teaching material for students in the Department of Electrical Power Engineering.
|
|
|
Machine tools safety
Smetana, Štěpán ; Blecha, Radim (referee) ; Blecha, Petr (advisor)
This Master’s thesis concerns about the safety of machinery, in the literary research part you can find information about the law system and requirements of European Union and Czech Republic. There is a description of the legal enactments, which the manufacturers of machinery needs to follow. Second part of this thesis is about the safety of a milling center. The milling center is analyzed here, you can find here the description of its components. The milling center was then described with the help of block diagrams. For each component from the block diagram you can find here a list of dangerous situations which can occur and also a list of safety precautions for each situation. Based on these information the list of requirements for the milling center was made.
|
guest ::
